2r series

There is a reason Excel’s horizontal two ram balers are known for their outstanding functionality and quality. The proprietary combination of interlocking construction and integrated control systems produces an indestructible automated two ram baler. Thereby eliminating the need for a full-time operator.

View 2R63 Baler Product Data Sheet PDF

2R63 BALER

2R63D-2

How Two Ram Balers Improve Operational Efficiency

Excel’s 2R Series balers are engineered for facilities that demand high throughput, minimal downtime, and automated operation. With features like extra-long platen travel, automatic wire tying, and shear jam correction, these balers reduce labor requirements and streamline the recycling process. Their rugged construction and advanced control systems make them ideal for continuous use in industrial and commercial environments.

Material Versatility and Bale Optimization

The 2R Series is designed to handle a wide range of materials including corrugated, PET, paper, and non-ferrous scrap. Each model offers customizable bale dimensions and tie spacing to meet specific shipping and handling requirements. Whether you’re processing lightweight recyclables or dense scrap metals, Excel’s two ram balers deliver consistent bale quality and optimal compaction.

Integration With Facility Workflows

Excel’s two ram balers are compatible with a variety of conveyor systems, allowing seamless integration into existing material handling setups. With options for above-ground and in-ground conveyors, facilities can automate loading and maximize space efficiency. Touchscreen controls and remote diagnostics further enhance usability and uptime.

Save time, labor, and money with a complete turn-key solution for your baling needs. The 2R63 two-ram, auto-tie baler chassis utilizes the same interlocking designs found in larger EXCEL® two-rams while remaining very economical. The 2R63 is constructed of four solid steel sheets (top, bottom, and both sides), providing seamless construction from end to end. Combine this innovative engineering with our use of only the highest quality components, and the result is the very best in durability and function.

The EXCEL® Model 2R63 bales the following materials: Office Paper, Newspaper, OCC, magazines, PET, HOPE, Aluminum Cans, Time Cans, Printer’s Waste, and other materials.

The 2R63 Series is manufactured standard with either left-hand or right-hand eject.
Accent 470 Wire Tie
20HP TEFC Motor, Standard Voltage – 208, 230, 460 Volt, 60 Hertz, 3 Phase
Horsepower limited pressure compensated piston pump
29 Second Main Ram Dry Cycle Time
Short Stroke Selector Reduces Cycle Time to 21 Seconds
Touchscreen Controls
Automatic Bale System
Automatic Shear Jam Correction
Full Platen Penetration
Complete with MV Hydraulic Oil
NEMA 12 Rated Enclosures and Controls
Power unit mounted on back of the machine for space savings
Air/Oil Heat Exchanger
12 Gauge High Tensile Baling Wire
Sandblasted, Primed and Painted Excel Blue for Long-Lasting Durability
Standard Hopper
Automatic Photo Eye Ram Cycle
UL, CUL Approved (CE Available)
Available with an Excel Baler above ground or in-ground conveyor for
complete turnkey system.

STRUCTURAL

HEIGHT: 62” Loading 52.5 Frame
LENGTH: 16.2” (493cm)
WIDTH: 16’ 11” (516cm)
CHAMBER: 60” L (153cm)W x 29.5” H (75cm)
FEED OPENING: 54” (138cm) x 40” W (102cm)L
SHIPPING WEIGHT: 32,730 lbs. (14,846kg) (as shown)

PERFORMANCE DATA

MAIN CYLINDER: 34 gal. (130 liters) Pressure Compensated; Horse Power Limited Piston Pump, 4,000 PSI Rated
EJECT CYLINDER: 3,000 PSI (207 BAR) automatic, 3,250 maximum
OIL RESERVOIR: DO8 Pattern, Hi-Flow Cushion Shift Design
INDEPENDENT PUMPS: N/A
MOTORS: (2) 6” (15cm) x74” (315cm) stroke x 4” rod
SYSTEM PRESSURE: 105 gal. (399 liters)
OVERALL PLATEN FORCE: N/A
PLATEN PSI: TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
CYCLE TIME: NEMA 12 Rated, UL Approved
ESTIMATED BALE SIZE: UL/CUL/CE Approved, NEMA 12 Rated
DIRECTIONAL VALVE: 3,000 PSI (207 BAR)
ENCLOSURE: 159,400 lbs. (72 tonne)
CONTROLS: 92 PSI (6.33 BAR)

BALE WEIGHTS *

OCC: 1,200 lbs. (544kg) up to 4.2 TPH
HDPE: 1,100 lbs. (499kg) up to 3.3 TPH
PET: 1,100 lbs. (454kg) up to 2.5 TPH
ALUMINUM CANS: 625 lbs. (284kg) up to 3.0 TPH
TIN CANS: 1,200 lbs. (544kg) up to 5.6 TPH
MAGAZINES: 2,000 lbs. (907kg) up to 9.4 TPH
NEWSPAPER: 1,500 lbs. (680kg) up to 8.0 TPH
OFFICE PAPER: 1,600 lbs. (725kg) up to 8.0 TPH

Automatic Tie System, Short Stroke Selector, Regenerative Circuit, Bale Discharge Table, Hour Meter, Bale Release Door, Lower Photo eyes, Interlocking Construction, Replaceable Hardox Wear Liners, Full Platen Penetration, Air to Oil Cooler, Touchscreen Controls

.

2R9/10 BALER

Sig100-Alliance-1-1

EXCEL® couples interlocking construction with the most advanced control system in the industry for an indestructible, automated 2RAM Baler. EXCEL’s® design for automated operation eliminates the need for a full-time operator. EXCEL’s® superior quality means reduced downtime, automatic operation and dramatic labor savings.

The EXCEL® Model 2R9/2R10 bales the following materials:

Office Paper, Newspaper, OCC, magazines, PET, HOPE, Aluminum Cans, Tin Cans, Painted Aluminum Siding, Insulated Wire, Aluminum Extrusions, Radiators, Copper Wire and Other Materials

The 2R9 and 2R10 are manufactured standard with either left-hand or right-hand eject.
Operator-free operation
50-horsepower TEFC motor, standard voltage— 460-volt, 60-hertz, three-phase
(2- to 50-horsepower, 2R10)
EXCEL Autonetics™ in with absolute ram position sensor with electronic display
Automatic wire tier
Industrial hardened logic controller
Fully lined with Hardox 400 replaceable wear liners
300 -gallon hydraulic reservoir with regenerative circuit (600-gallon in the 2R10)
One-year EXCEL limited warranty (parts and labor)
Upper and lower photo eyes (sender/receiver upper photo eye with integrated conveyor control)
NEMA 12-rated enclosures and controls with conveyor starter
Installed and working modem for online diagnostics.
Castle Key safety interlocking entry system
Bale chamber penetration (2R9, 27 inches; 2R10, 24 inches)
Automatic bale release door
Automatic shear jam correction
Bale discharge platform
Sandblasted, primed and painted Excel Blue for long-lasting durability.
Air-to-oil heat exchanger
Integrated steel platen wiper
UL-, CUL-approved (CE available)
Bale counter
Hardened, serrated, turn-able cutting knives.
Hour meter
9-inch eject cylinder
Separation door for solid waste and scrap applications (available option)
Available with multiple conveyor options for a turnkey system

STRUCTURAL

OVERALL LENGTH: 28’7” (8.75 meters) with stairs
WIDTH: 13’3” (4.05 meters)
HEIGHT: 8’8” (2.68 meters)
FEED OPENING: 40”W x 65”L (102cm x 165cm)
CHAMBER FLOOR: 3/4” thick plate plus 3/8” Hardox 400 liner
CHAMBER SIDE WALLS: 3/4” thick plate plus 3/8” Hardox 400 liner
BALER SHIPPING WEIGHT: 47,500 lbs. (21,545kg)

PERFORMANCE DATA

MAIN CYLINDER: 9” (22.9cm) Bore x106” (269cm) stroke x 6”(15cm) Chrome Rod
EJECT CYLINDER: 9” (22.9cm) Bore x 6” (15cm) Chrome Rod
OIL RESERVOIR: 300 gallon
INDEPENDENT PUMP: 100 GPM (379 liters)
MOTOR: 50 HP TEFC 460V, 3 Phase
HYD SYSTEM PRESSURE: 3,000 PSI Automatic Mode (3,250 Maximum)
OVERALL PLATEN FORCE: 190,851 lbs./206,756 lbs. Maximum
PLATEN PSI: 162 PSI/175 PSI Maximum
CYCLE TIME: 17 Seconds
ESTIMATED BALE SIZE: 60” (152cm) L x 45” (114cm) W x 30” (76cm) H 46.88 cu ft (adjustable)
ENCLOSURE: NEMA 12 Rated
CONTROLS: CE/UL Approved NEMA 12 Rated

BALE WEIGHTS *

FOAM: 1,400 lbs. (680kg) 5-8 TPH
OCC: 1,250 lbs. (566kg) 3 TPH
HDPE: 1,150 lbs. (521kg) 2 TPH
PET: 750 lbs. (408kg) 3-5 TPH
ALUMINUM CANS: 1,600 lbs. (816kg) 9-12 TPH
TIN CANS: 2,300 lbs. (1,087kg) 10-13 TPH
MAGAZINES: 1,600 lbs. (771kg) 10-13 TPH
NEWSPAPER: 2,000 lbs. (910kg) 10-17 TPH
MSW: 1,600 lbs. (771kg) 8.4 TPH
ALUMINUM EXTRUSION: 1,000 lbs. (554kg) 2.7 TPH
PAINTED ALUMINUM SIDING: 1,700 lbs. (907kg) 4.5 TPH
RADIATORS: 1,500 lbs. (771kg) 4.7 TPH
INSULATED COPPER WIRE: 3,300 lbs. (1,587kg) 10.5 TPH
MISC. NON-FERROUS SCRAP: 1,300 lbs. (680kg) 5.1 TPH

STRUCTURAL

OVERALL LENGTH: 33’10” (10.09 meters) with stairs
WIDTH: 13’5” (4.11 meters)
HEIGHT: 8’8” (2.68 meters)
FEED OPENING: 40”W x 90”L (102cm x 229cm)
CHAMBER FLOOR: 1” thick plate plus 3/8” Hardox 400 liner
CHAMBER SIDE WALLS: 3/4” thick plate plus 3/8” Hardox 400 liner
BALER SHIPPING WEIGHT: 58,000 lbs. (26,308kg)

PERFORMANCE DATA

MAIN CYLINDER: 10” (25.4cm) Bore x130” (330cm) stroke x 7”(18cm) Chrome Rod
EJECT CYLINDER: 9” (22.9cm) Bore x 6” (15cm) Chrome Rod
OIL RESERVOIR: 600 gallon
INDEPENDENT PUMP: 200 GPM (758 liters)
MOTOR: (2) 50 HP TEFC 460V, 3 Phase
HYD SYSTEM PRESSURE: 3,000 PSI Automatic Mode (3,250 Maximum)
OVERALL PLATEN FORCE: 235,619 lbs./255,254 lbs. Maximum
PLATEN PSI: 200 PSI/216 PSI Maximum
CYCLE TIME: 16 Seconds
ESTIMATED BALE SIZE: 60” (152cm) L x 45” (114cm) W x 30” (76cm) H 46.88 cu ft (adjustable)
ENCLOSURE: NEMA 12 Rated
CONTROLS: CE/UL Approved NEMA 12 Rated

BALE WEIGHTS *

FOAM: 1,500 lbs. (680kg) 8-12 TPH
OCC: 1,250 lbs. (566kg) 3.5-7 TPH
HDPE: 1,150 lbs. (521kg) 3-6 TPH
PET: 900 lbs. (408kg) 4-8 TPH
ALUMINUM CANS: 1,800 lbs. (816kg) 13-18 TPH
TIN CANS: 2,400 lbs. (1,087kg) 18-23 TPH
MAGAZINES: 1,700 lbs. (771kg) 14-19 TPH
NEWSPAPER: 2,200 lbs. (1,000kg) 17-28 TPH
MSW: 1,700 lbs. (771kg) 8.4 TPH
ALUMINUM EXTRUSION: 1,200 lbs. (554kg) 2.7 TPH
PAINTED ALUMINUM SIDING: 2,000 lbs. (907kg) 4.5 TPH
RADIATORS: 1,700 lbs. (771kg) 4.7 TPH
INSULATED COPPER WIRE: 3,500 lbs. (1,587kg) 10.5 TPH
MISC. NON-FERROUS SCRAP: 1,500 lbs. (680kg) 5.1 TPH

THE LATEST

Insights, articles, and tips that help you work smarter and faster.

News

Buying a Refurbished Baler? Beware & Careful

News

The Benefits of a Recycling Baler

News

Why Horizontal Baler vs Vertical Baler

More News

Frequently Asked Questions

Full-ejection horizontal recycling balers are best used for baling materials that are heavier and denser, such as metals, plastic bottles and textiles. The full-ejection design of these balers means that the bales are ejected from the chamber after they are formed, which allows for a more efficient and continuous baling process.

The full-ejection design also reduces the risk of materials becoming jammed in the baler, which can result in downtime and increased maintenance costs. This makes full-ejection horizontal recycling balers a good option for businesses and organizations that need to handle high volumes of dense or heavy materials and want to minimize downtime and maintenance requirements.

Another advantage of full-ejection horizontal recycling balers is their ability to produce uniform bales, which can result in higher recovery values. The full-ejection design ensures that each bale is compact and uniform in size, which can make it easier to transport and process the materials.

Overall, full-ejection horizontal recycling balers are a good option for businesses and organizations that need a reliable and efficient baling solution for dense or heavy materials, such as metal or plastic recycling facilities, textile manufacturers or industrial companies. They are particularly well-suited for situations where a high throughput of materials is required, and downtime and maintenance costs need to be minimized.

Full-penetration, closed-door horizontal balers are typically best used for volumes of baling ranging between two bales per day to 100 tons per month. They are used for more difficult to bale materials, such as metals, plastic bottles and sheet paper. They are far more efficient than vertical balers and more cost-effective and versatile than open-end balers.

Full-penetration closed-end balers are also often used in situations where space is limited, as the small footprint and inline feed configuration saves valuable floor space.

Another advantage of these balers is their ability to fully eject bales after tie-off. This results in an easy changeover of material grades. It also eliminates cross-contamination between bales.

Overall, full-penetration closed-end recycling balers are a good option for businesses and organizations that generate large volumes of material or difficult to bale materials.

A baler is a machine that is used to compress and bind recyclable materials such as cardboard, paper, plastics, and metals into compact and manageable bales. Baling is an important step in the recycling process for several reasons:

Saves space: Baling compresses the recyclable materials into dense, space-saving bales that take up less storage space. This is especially important in facilities where space is limited.

Improves efficiency: Baling reduces the number of trips required to transport the recyclable materials, thus improving efficiency and reducing transportation costs.

Increases revenue: Baled materials have a higher value in the recycling market than loose materials because they are easier to handle and transport. This means that baling can increase the revenue earned from selling recyclable materials.

Enhances safety: Baling reduces the risk of workplace injuries and accidents by keeping the recyclable materials contained and organized.

Overall, using a baler for recycling is a cost-effective and efficient way to manage and transport recyclable materials while reducing the environmental impact of waste.

Start the process

Let us help you waste less and recycle more today!

Get a Quote